Home page - Turntables

Cartridge Audio-Technica AT-VM95C

Audio-Technica 04961310146023 AT-VM95C VOIATH099
BAR Code: 04961310146023
SKU Code: AT-VM95C
User Code: VOIATH099
Warranty: 2 years
Cartridge Audio-Technica AT-VM95C
OutOfStock
Not in stock
€32.78

This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Specifications

  • Frequency Response: 20 - 20,000 Hz
  • Channel Separation: 18 dB (1 kHz)
  • Vertical Tracking Angle: 23°
  • Vertical Tracking Force: 1.8 to 2.2g (2.0g standard)
  • Stylus Construction: Bonded Round Shank
  • Recommended Load Impedance: 47,000 Ω
  • Coil Impedance: 3.3 kΩ (1 kHz)
  • DC Resistance: 485 Ω
  • Coil Inductance: 550 mH (1 kHz)
  • Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)
  • Output Channel Balance: 2.5 dB (1 kHz)
  • Stylus Shape: Conical
  • Cantilever: Aluminium Pipe
  • Static Compliance: 17 x 10 – 6 cm / dyne
  • Dynamic Compliance: 6.5 x 10 – 6 cm / dyne (100 Hz)
  • Mounting: 1/2” centres
  • Cartridge Weight: 6.1g
  • Dimensions: 17.2 x 18.9 x 28.3 ( H x W x D mm)
  • Accessories Included:
    • Two 11 mm installation screws;
    • Two 8 mm installation screws;
    • Two washers
  • Model: AT-VM95C
  • Recommended Load Capacitance: 100-200 pF
  • Replacement Stylus: AT-VMN95C
  • Stylus Size: 0.6 mil
  • Type: VM Stereo Dual Magnet
  • Wire Used for Coil: T.P. Copper

Cartridge AT-VM95C
Official website Audio-Technica AT-VM95C

B2B

Products are intended only for resale partners.

Application for partners is available here.